Industrial Corken compressors

The Corken Industrial Series range of compressors are designed to transfer many industrial and exotic gases for research, and the oil and gas industry.

---

CORKEN industrial series

The Corken Industrial Series range of compressors are designed to transfer a wide range of industrial gases such as butadiene, hydrogen, helium, methyl chloride, sulfur dioxide, chlorine, refrigerant gases, exotic gases for research, corrosive biogases in landfills and hydrocarbon gases in the oil and gas industry.

Corken offers one of the most versatile lines of industrial vertical compressors in the world. There are several compressor models with single or two stage compression, air or water cooling options, and single or double acting compression for maximum efficiency. Lubricated and non-lubricated versions are also available.

Oil-free gas compression, maximum leak control and containment:

Most of Corken’s vertical industrial compressors offer oil-free gas compression, thanks to their double (style D) and triple seal (style T) design. This allows the compressor to supply oil-free gas for overpressure or vacuum.

Single or double stage compressors:

Single-stage compressors are typically used in applications where the gas compression ratio is less than 5:1.

Typically, applications with relatively low differential pressures, such as transportation, railcars, and marine offloading are well suited to a single-stage compressor.

A compressor with two compression stages is necessary when the gas compression ratio is greater than 5:1.

Double-stage compressors divide the compression process into two separate stages.

Two-stage compression is commonly used in pressure boosting and vapor recovery applications requiring high differential pressures.

Single or double acting compressors:

Single-acting vertical compressors perform only one compression per revolution, so the compression takes place on only one side (top) of the piston.

Double-acting compressors perform two compressions per revolution, so the compression takes place on both sides of the piston.

Double-acting compressors provide much higher working pressure than single-acting compressors.

---

Single stage compressors:

Specification	Models
Double packing set (D-style)	D91	D291	D491	D491-3	D691	D691-4	FD891
Triple packng set (T-style)	T91	T291	T491	T491-3	T691	T691-4	FT891
Bore (mm)	76.2	76.2	101.6	76.2	114.3	101.6	114.3
Stroke (mm)	63.5	63.5	76.2	76.2	101.6	101.6	101.6
Displacement (m3/h) maximum @ 825 RPM	14.3	28.7	61.2	34.5	103.3	81.6	198.8
Max working pressure(bar)	23.1	23.1	231	41.4	23.1	41.4	31
Max engine power (kW)	5.6	11	11	11	26.1	26.1	34
Max temperature (°C)	177	177	177	177	177	177	177

Double stage compressors:

Specification	Models
Double packing set (D-style)	FD151	D191	FD351	D391	WFD551	FD591	D791
Triple packng set (T-style)	FT151	T191	FT351	T391	WFT551	FT591	T791
Bore on 1st stage (mm)	63.5	76.2	69.9	114.3	101.6	152.4	152.4
Bore on 2nd stage (mm)	31.8	44.5	44.5	63.5	63.5	82.5	82.5
Stroke (mm)	63.5	63.5	76.2	76.2	101.6	101.6	101.6
Displacement (m3/h) maximum @ 825 RPM	10	15.2	14.4	38.7	42.1	91.7	179.8
Max working pressure(bar)	82.8	41.4	82.8	41.4	69	41.4	41.4
Max engine power (kW)	11	11	11	11	26.1	26.1	34
Max temperature (°C)	177	177	177	177	177	177	177